Sends every replayable delivery in a time window to your endpoints again.

POST /api/notifications/events/replay deprecated

Requires: Notifications.Events.Replay, merchant scope.

The bulk form of the single replay, for a receiver that was down: give it the window your receiver was unavailable for and the platform replays what did not land, one delivery at a time, on its own delivery path. The window says what to look at; it does not say how much this call will do. One call takes on at most a hundred deliveries and spends at most sixty seconds starting them, plus however long the last one it started takes to reach a verdict. Everything it selected but never reached is reported as `notAttempted` rather than dropped. Run the same request again while `reachedCap` is true or `notAttempted` is above zero, until both are clear. Running it again is safe and needs no idempotency key. A delivery that succeeded on the previous run is no longer replayable, so a repeat run only touches what is still outstanding. The same per-endpoint replay budget applies, shared with the single replay, so a run against a receiver that has only just come back cannot stampede it. Deliveries the budget refused are counted under `rateLimited` and are untouched, so a later run picks them up.

Try this in the console

Example request

Every block below sends the same request. Replace {{BASE_URL}} with the address of the API you are calling and {{API_KEY}} with your own key.

The request body is a ReplayWebhookEventsInput. See the Request body section below for its fields.

cURL PowerShell TypeScript C# Python

cURL

curl -X POST "{{BASE_URL}}/api/notifications/events/replay" \
  -H "api-key: {{API_KEY}}" \
  -H "Content-Type: application/json" \
  -d '{
  "fromUtc": "2026-01-01T00:00:00Z",
  "toUtc": "2026-01-01T00:00:00Z"
}'

PowerShell

$headers = @{
    'api-key' = '{{API_KEY}}'
}

$body = @'
{
  "fromUtc": "2026-01-01T00:00:00Z",
  "toUtc": "2026-01-01T00:00:00Z"
}
'@

$response = Invoke-RestMethod -Method POST -Uri '{{BASE_URL}}/api/notifications/events/replay' `
    -Headers $headers -ContentType 'application/json' -Body $body

npm install @winkpg/winkpg-api

TypeScript (SDK)

import { Configuration, NotificationsApi } from '@winkpg/winkpg-api';

const api = new NotificationsApi(new Configuration({
  basePath: '{{BASE_URL}}',
  apiKey: '{{API_KEY}}',
}));

const { data } = await api.notificationsReplayWebhookEvents({
  "fromUtc": "2026-01-01T00:00:00Z",
  "toUtc": "2026-01-01T00:00:00Z"
});

TypeScript (raw HTTP)

const response = await fetch('{{BASE_URL}}/api/notifications/events/replay', {
  method: 'POST',
  headers: {
    "api-key": "{{API_KEY}}",
    "Content-Type": "application/json",
  },
  body: JSON.stringify({
    "fromUtc": "2026-01-01T00:00:00Z",
    "toUtc": "2026-01-01T00:00:00Z"
  }),
});

const data = await response.json();

dotnet add package WinkPg.Api.Client

C# (SDK)

using WinkPg.Api.Client.Api;
using WinkPg.Api.Client.Client;
using System.Text.Json;

var config = new Configuration { BasePath = "{{BASE_URL}}" };
config.AddApiKey("api-key", "{{API_KEY}}");

var api = new NotificationsApi(config);
var body = JsonSerializer.Deserialize<ReplayWebhookEventsInput>("""
    {
      "fromUtc": "2026-01-01T00:00:00Z",
      "toUtc": "2026-01-01T00:00:00Z"
    }
    """);

var result = await api.NotificationsReplayWebhookEventsAsync(body);

C# (raw HTTP)

using System.Text;

using var http = new HttpClient { BaseAddress = new Uri("{{BASE_URL}}") };

var request = new HttpRequestMessage(new HttpMethod("POST"), "/api/notifications/events/replay");
request.Headers.Add("api-key", "{{API_KEY}}");

request.Content = new StringContent("""
    {
      "fromUtc": "2026-01-01T00:00:00Z",
      "toUtc": "2026-01-01T00:00:00Z"
    }
    """, Encoding.UTF8, "application/json");

var response = await http.SendAsync(request);
response.EnsureSuccessStatusCode();
var json = await response.Content.ReadAsStringAsync();

pip install winkpg-api

Python (SDK)

import winkpg_api

configuration = winkpg_api.Configuration(host="{{BASE_URL}}")
configuration.api_key["ApiKey"] = "{{API_KEY}}"

with winkpg_api.ApiClient(configuration) as client:
    api = winkpg_api.NotificationsApi(client)
    body = winkpg_api.ReplayWebhookEventsInput.from_dict({
      "fromUtc": "2026-01-01T00:00:00Z",
      "toUtc": "2026-01-01T00:00:00Z"
    })
    result = api.notifications_replay_webhook_events(body)

pip install requests

Python (raw HTTP)

import requests

headers = {
    "api-key": "{{API_KEY}}",
    "Content-Type": "application/json",
}

body = {
  "fromUtc": "2026-01-01T00:00:00Z",
  "toUtc": "2026-01-01T00:00:00Z"
}

response = requests.request(
    "POST",
    "{{BASE_URL}}/api/notifications/events/replay",
    headers=headers,
    json=body,
)
response.raise_for_status()
data = response.json()

Parameters

Name	In	Type	Description
`suppressNulls` required	query	boolean	If true, omit properties with null values.

Request body

application/json , required

Field	Type	Description
`fromUtc` required	string (date-time)	The start of the window, in UTC.
`toUtc` required	string (date-time)	The end of the window, in UTC.
`status` required	all of DeliveryStatus	Narrows to one status. Only `Failed`, `DeadLettered` and `Skipped` can be replayed; leave it unset to take on all three. nullable
`eventType` required	string	Narrows to one event type. Leave it unset to take on every event type. nullablemax length 512

This request body has no documented fields.

Responses

200 The tally of what the run did.

Body: WebhookEventRedriveResultDto Each item has these fields.

Field	Type	Description
`considered` required	integer (int32)	Deliveries selected in the window.
`delivered` required	integer (int32)	Accepted by your endpoint.
`attempted` required	integer (int32)	Contacted and not accepted.
`notSent` required	integer (int32)	Held back by the platform; nothing was contacted.
`notRetryable` required	integer (int32)	No longer in a replayable state by the time the run reached them.
`suppressed` required	integer (int32)	Refused because the destination endpoint is actively suppressed.
`rateLimited` required	integer (int32)	Refused because the endpoint's replay budget for this window is spent.
`failed` required	integer (int32)	Reset, then the attempt ended in a state the platform cannot summarise.
`notAttempted` required	integer (int32)	Selected but never started, because the run reached its time budget.
`reachedCap` required	boolean	True when the selection filled the platform's batch cap, so there is likely more in the window. Run the same request again.

This response has no documented body fields.

400 The window is malformed, wider than the platform allows, or narrowed to a status that cannot be replayed.

Body: Each item has these fields.

Field	Type	Description

This response has no body.

403 The credential resolves no single merchant.

Body: Each item has these fields.

Field	Type	Description

This response has no body.

409 The platform cannot attempt a delivery in its current state. Nothing was changed.

Body: Each item has these fields.

Field	Type	Description

This response has no body.

default The request failed. The body carries the standard error envelope: a machine-readable `error.code`, a human-readable `error.message`, and `error.validationErrors` when the failure was a validation rejection. See the error-code reference in this document's description for the values `error.code` can take.

Body: RemoteServiceErrorResponse Each item has these fields.

Field	Type	Description
`error` required	RemoteServiceErrorInfo

This response has no documented body fields.

429 The request was refused because a rate limit was exceeded. Wait at least the interval `Retry-After` names before retrying, then back off. Limits are tuned per deployment, so read the allowance from the response headers rather than assuming a fixed ceiling.

Body: RateLimitProblemDetails Each item has these fields.

Field	Type	Description
`type` required	string	The problem type identifier. Always the same value: the failure is the status code itself, so there is no sub-type for a caller to branch on. nullable
`title` required	string	A short, human-readable summary of the problem type. nullable
`status` required	integer (int32)	The HTTP status code, repeated in the body as the problem-details format defines.
`detail` required	string	A human-readable explanation of this occurrence of the problem. nullable
`retryAfterSeconds` required	integer (int32)	How long to wait before retrying, in whole seconds, carrying the same figure as the `Retry-After` header. Always at least one: a value of zero would invite an immediate retry that is certain to be rejected again.

This response has no documented body fields.

Errors

A failed request returns the platform error envelope. The error reference lists every value error.code can carry and shows the four response shapes.

Codes declared by Notifications

The API reference isn't available right now

No such operation

This reference may be out of date

Sends every replayable delivery in a time window to your endpoints again.

Example request

Parameters

Request body

Responses

200 The tally of what the run did.

400 The window is malformed, wider than the platform allows, or narrowed to a status that cannot be replayed.

403 The credential resolves no single merchant.

409 The platform cannot attempt a delivery in its current state. Nothing was changed.

429 The request was refused because a rate limit was exceeded. Wait at least the interval `Retry-After` names before retrying, then back off. Limits are tuned per deployment, so read the allowance from the response headers rather than assuming a fixed ceiling.

Errors

Authentication